|
You may download the latest version of BIOS from our site.Do not forget to read the relative readme file for correct operation. If you have any questions beyond the readme file, please don't hesitate to contact our Field Application Engineer (FAE) Dept. at [email protected].
BH6
Filename: BH6KG.EXE
Date: 04/01/1999
ID: KG
NOTE:
- Supports the PIII CPU Processor Serial Number function, it��s called "Processor Number Feature" in the BIOS Features Setup section.
- Supports assigned manual PCI IRQ in the PCI & Onbard section.
Filename: BH6JJ.EXE
Date: 02/08/1999
ID: JJ
NOTE:
- Supports Socket 370 Celeron 433 MHz CPU
- Supports correct naming of Pentium III CPU.
Filename: BH6HN.EXE
Date: 01/19/1999
ID: HN
NOTE:
- Fixes the NEC ATAPI ZIP drive incompatibility problem.
- Supports the Intel Pentium III 450 and 500 Mhz Katmai CPU.
- Supports the Intel Celeron 366 Mhz CPU option, up to 400 Mhz compliance.
- Supports the clock multiplier up to 8 times.
- Solves the problem of Windows98 not being able to shut-down properly when the ACPI function is enabled.
- You have to input /CD parameter to Clear DMI pool data while updating the BIOS.
EXTRA NOTE:
For Pentium III (Katmai) users, the BIOS will indicate PII EVEN if it is a PIII because the code was finished just prior to the unveiling of the new PIII name for the Katmai. This will be corrected in the next BIOS.
Filename: BH6GY.EXE
Date: 11/23/1998
ID: GY
NOTE:
- Updates the K/B default setting to 8Mhz to fix Micorsoft Elite K/Bs.
- Changes the ACPI default setting to disable.
Filename: BH6FU.EXE
Date: 10/20/1998
ID: FU
NOTE:
- Supports ACPI function.
- When upgrading to the BH6 FU BIOS, please use AWDFLASH.EXE 6.6 to avoid upgrade failure.
Filename: BH6FL.EXE
Date: 09/10/1998
ID: FL
NOTE:
- Supports the Celeron 300 & 333 CPUs with built-in cache.
- The BH6 uses 2M EEPRAM, please use the AWDFLASH.EXE 6.22 version (or newer) for upgrades.
|
